Object Listing

A pair of almost identical headrests with their upper transverse plane curved up at either end with lugs projecting from the under surface. Strip of linear pattern at either end of upper surfaces. Vertical supports each consisting of two pairs of rectilinear columns that curve slightly inwards towards the centre on each headrest. These end in a flat bilobal base. Each headrest has a section of carved interlocking wooden chain that would originally been joined together.

Long flat crossbar decorated at each rounded end with radiating diagonal carved grooves. Three slightly uneven rectangular pillars narrowing slightly towards the top.

Long flat slightly curved crossbar decorated near each end with two parallel grooved lines. Three slightly uneven rectangular pillars decorated front and back with rows of raised bumps called amasumpa.

long flat crossbar with three support pillars. The outer two are each decorated with 5 diagonal grooves and the central pillar has one groove running vertically down its centre. The reverse side has the two outer pillars decorated with zigzag grooves and the centre pillar has diagonal grooves in shallow slant

Long flat slightly curved crossbar decorated near each end with a single parallel grooved line. Three slightly uneven rectangular pillars decorated front and back with rows of raised bumps called amasumpa with the top section on each pillar left undecorated.

Long flat slightly curved crossbar decorated near each end with four parallel grooved lines. Two rectangular pillars are undecorated.

Roughly round, conical button-like shape decorated around its lower half with blackened grooves in linear and checkerboard designs

Leaf/shovel-shaped bowl that has a very long handle with two pleats at the lower end of its handle near the bowl. It has some linear zigzag designs just after the pleats and the handle is very worn at its wider end.

Carved spoon in two parts - linked together in the middle. The lower part is made up of a spoon bowl with its handle in the form of a looped snake. The upper section has a hand holding an egg-shaped object and the form of an armless man with an headring and isinene (front covering) leaning against the shaft/wrist.

Roughly ovoid, conical button-like shape decorated around its lower half with blackened grooves in linear and checkerboard designs

Roughly square with rounded edges, conical button-like shape with raised centre decorated with blackened grooves in linear and checkerboard designs

Roughly square with rounded edges, conical button-like shape with raised centre decorated with blackened grooves in linear and checkerboard designs

A short curved platform undecorated resting on a tall narrow central pillar divided into 3 sections. The two outer pillars bulge slightly outwards at their centres and the central larger column is intersected with four rectangular apertures. These rest on a convex rounded base. Base and columns are decorated with linear grooved patterns. A leather thong is tied around the top of the vertical pillars.

Short upper platform of roughly rectangular shape rests on a cylindrical column that in turn emerges from a inverted cone-like base. The base is decorated with long liner grooves and short grooved nicks in roughly patterned rows.. A leather thong is threaded through a hole in the neck area.

Abstracted figure with a twin-lobed head in a spatula- shape that rests on a cylindrical neck that in turn rests on a slightly larger cylinder that flares slightly at the bottom. Two truncated cone-like breasts project from the upper section of the larger cylinder in line with the groove between the two sections of the head, a slightly projecting navel and a wedge=shaped nick out of the flared bottom. Two strings of beads - one green and one orange, decorate the neck

Spoon with broad leaf-shaped bowl that has a crack. It has a handle that arches upwards and . It flares slightly towards its end and is decorated with geometric engraved designs.

Circular flat brass collar with a hole in the middle for the neck and a slit in the metal running though from inner to outer edge

Rectangle of canvas with beadwork in horizontal, angled and vertical geometric designs. The canvas is folded over to create a double layer along the top edge which is trimmed with brass beads. The lower section has two side flaps and a fringe between consisting of a row of leather strips tipped with beads.

Stool with inverted indented dome as top and dome as base. It has two roughly rectangular pillars and a slanted bar between them. It has a vertical open arch as a handle

Stool with inverted indented dome as top and dome as base. It has a carved elephant supporting a short cylindrical support on its back as a central pillar

Stool with inverted dome with indented top and inverted dome as base. It has a central pillar divided into two sections with a flat circular platform in the middle. The upper and lower sections has a ring of legs that are angled into V shapes and these point outwards and have a hollow centre.

Stool with inverted indented dome as top and inverted dome as base. It has a hollow rectangular pillar with square opening cut into it

Stool with inverted indented dome as top and inverted dome as base. It has a hollow rectangular pillar with square opening cut into it

Stool with inverted indented dome as top and dome as base. It has a central pillar divided into two sections with a flat circular platform in the middle that is narrower than the upper and lower parts of the stool. A ring of legs in the top section slope inwards from the upper edge to the circular central ring and the lower set of legs slant inwards from the base to the central platform.

Stool with inverted indented dome as top and dome as base. It has an open rectangular frame as a pillar

Stool with inverted indented dome as top and dome as base. It has a carved lion with an open mouth with a cylindrical post resting on its back as a central pillar

Stool with inverted indented dome as top and dome as base. It has a carved quadruped with a cylindrical post resting on its back as a central pillar

Stool with inverted indented dome as top and dome as base. It has a carved donkey/zebra with a cylindrical post resting on its back as a central pillar

Stool with inverted indented dome as top and dome as base. It has a central pillar divided into two sections with a flat circular platform in the middle that is slightly narrower than the upper and lower parts of the stool. A ring of four triangular legs in the top section slope slightly inwards from the upper edge to the circular central ring and the lower set of 4 triangular legs slant slightly inwards from the base to the central platform.