Object Listing

Circular platforms top and bottom that slope in towards central pillar. Top panel is indented and has an open V cut in one edge inside the rim. Pillar is a spherical form with vertical slits cut into it at recular intervals . Lower platform decorated with four panels of radiating groooved lines. Upper platform has some linear designs around its upper edge.

Circular platform at top that has indented surface and slopes down towards three legs that arch out and then descend vertically. Each leg has a V shape linking between its upper end and the legs. There are also three lugs sticking out from the upper rim one between each leg.

Circular platform at top that has indented surface and slopes down towards three legs that arch out and then descend vertically. Each leg has a V shape that is part of the upper leg and linked to the rim of the round seat. The legs desct=ribe arches underneath teh seat and there are also three lugs sticking out from the upper rim one between each leg.

Stool with circular inverted dome with indented top and inverted dome as base. Its central support is a horned/pointy eared animal form that has a rectangualr pillar between its back and the upper dome. The dome also rests on the pointy horns/ears.

Stool with circular inverted dome that have vertical V as their outer shape. with indented top. The legs have a flat inner profile that narrows to a point at the base. There are linear horizontal grooves on the legs

Short concave crossbar that is an inverted hollow half cylinder. Two pillars flare out with a V-shaped projection between. Beadwork covers the top of the pillars up to V-shape and two looped bands of beads project out at the sides.

Crossbar is steeply curved up and rounded at its narrow ends. Two pillars are flat planes facing outward and are angled so the space between them narrows to the base which is an ovoid raised platform. The sides, a rectangle on the top of platform and base are engraved with endless knot designs

Crossbar curved up towards narrow ends . Lugs are flat rectangular flaps facing inward. Two outer rectangular pillars frame an inner pillar composed of an X shape with a flat circular central joint. The pillars rest on a raised bilobal base with two projecting Vs between the lobes one on either side.

Crossbar curved up towards narrow ends with single rows of zig-zag designs at either end. Lugs are flat rectangular flaps facing inward with two rows of zig-zag designs. Two outer pillars are M shaped and join a rectangular central inner column which is decorated with vertical rows of diamond designs.The pillars rest on a raised bilobal base .

Crossbar curved up towards narrow ends. Lugs are hollow arches facing outward. Two outer rectangular pillars in a X configuration flank a central rectangular pillar that has 3 triangular designs along its lenght. The point at where all meet is a flat rectangular panel with rounded ends and decorated with zig-zags. The pillars rest on a raised, truncated ovoid base with a projecting V in the centre.

Rectangular crossbar curved and decorated on the narrow flattened ends with a row of lines carved in relief. Lugs are truncated triangles facing sides and decorated with rows of zigzags. Column is 'X' shaped with an ovoid platform at centre with the outward facing medallion shape decorated with carved zigzags and a horizontal line through the centre on one side and 2 rows of vertical parallel lines with a horizontal line through the centre on the reverse side. i The lower legs of the X resting on an oval base with outward flaring champhered edges.

Rectangular crossbar curved and decorated on the narrow flattened ends with a row of zigzags carved in relief. Lugs are rectangular facing sides . Column is 'X' shaped with an ovoid bulb at centre and with the lower legs of the X slanting outwards towards the base. Base is bilobal with outward flaring champhered edges.

Crossbar curved up towards narrow ends with a line of grooves carved at either end. Lugs are semi-circles facing inward decorated with concentric grooves. It has two round pillars in an X shape with a round central bulb where the pillars cross. These rest on a raised bilobal base with a small projecting triangle between the lobes.

Crossbar curved up towards narrow ends with a line of grooves carved at either end. Lugs are semi-circles facing outward decorated with strands of hair on one lug. It has two rrectangular pillars in an X shape with a round central pillar. Where the pillars meet they rest on a flat circular losenge. This rests on a raised quadrlilobal base flared at the bottom and narrowing upwards. This base has a string of red beads around it.

Crossbar curved up towards narrow ends with a line of zig-zags carved at either end. The crossbar has two inward facing triangles carved in its surface that are made up of smaller triangles. A single flat rectangular pillar rests on a raised ovoid base that is pinched in at the centre where a small triangular shape projects. The flat sides of the pillar are decorated with carved geometric linear and circular designs. Where it meets the base and the crossbar it has two triangular opening at either end.

Thick rectangular crossbar curved up towards narrow ends with two rows of designs carved near each narrow end and one short row in the centre. The central section is made up of three sections - the two outer sections have a rectangular block with a narrower recrangular pillar project in from the top and the bottom. The central section has two shorter rectangular blacks joined by a short pillar and with narrower rectangular pillars projecting from the top and the bottom. These are joined to each other to form a lattice . The three upper pillars join the crossbar and the three lower pillars rest on a flat bilobal base.

Rectangular crossbar curved slightly up at narrow ends. These drop down directly into flat rectangular pillars that flare out at the bottom.

Rectangular crossbar curved and decorated at the narrow ends with a row of incised triangles. The lugs are barrel shaped facing sideways. Pillar split in two and is diagonal and grooved. It rests on a base that is two flat circles joined by a short rectangular bar.

Rectangular crossbar curved slightly up at narrow ends. Flat rectangular lugs face inwards. Pillar is one diagonal flat plane concave on one side projecting out at an angle on the opposite side (knee-like). It rests on a base that is shaped like a foot with toes pointing in the direction of the point on the pillar.

Elongated ovoid shape curving up towards narrow ends. Ten round pillars rest on a raised ovoid with a line of engraved zig-zags around it.

Upper platform is flat rectangular plane broader than is usual in headrests. It curved slighlty upwards to all four corners. Two convex open arches that rest on raised pentagonal feet which are linked by a rectangilar cross bar.

Headrest and staff combination - headrest has a crossbar that curves up towards narrow ends with a row of lines at either end. Three flat rectangular pillars rests on a flat base with two circles joined by a rectangular bar in the middle. A staff passes underneath this crossbar - the main part of the shaft projecting one way and the balance with a human head finial facing upwards the other way. The head is male and wears a headring. This end of the staff has been decorated with animal hair with beads threaded onto it.

Rectangular crossbar curved up towards narrow ends. Lugs are semi-circles facing outward. Single rectangular pillar decorated front and back with four horizontal pleats has a vertical groove down the centre. Base is bilobal with a small triangular shape projecting from between the two lobes. Along the horizontal plane and meeting the side of the pillar centrally along its vertical length is a form imitating the back half of a shotgun. Projecting out of the other side are two long 'barrels' with two raised bands encircling its length.

Rectangular crossbar curved up towards narrow ends. Lugs are semi-circles facing outward. The pillar consists of three vertical rectangles the central one embellished with 5 horizontal pleats. Along the horizontal plane and meeting the side of the pillars centrally along their vertical length is a round shaft with an open circle that has 4 inward pointing triangles as 'spokes. A cone-like bar projects from either side of this 'wheel'. The base is a flat ovoid.

Rectangular crossbar curved and decorated at the narrow ends with a row of incised triangles. The lugs are flat rectangles facing inwards. Three diamond shaped pillars rest on a horizontally positioned barrel which rests on two diamond shaped pillars. Base is flat and bilobal with a triangle projecting from between the two lobes. Along the horizontal plane and meeting the side of the pillars centrally along their vertical length is a round shaft with the longest section projecting from one side of the headrest. The other shorter section of the shaft projects out of the opposite side and is surmounted by an ovoid finial with its flat side horizontal.

Irregularly shaped headrest retaining its 'branch'-like form. It has 4 legs each at a different angle.

Rectangular crossbar curved slightly up at narrow ends. These drop down directly into flat rectangular pillars that flare out at the bottom. A strap of leather is tied so that it stretches between the two pillars. The outsides of one of the pillars is engraved with linear cross-hatched designs and letters of the alphabet.

Crossbar rectangular and curved. Lugs are open arches facing outwards. Three cylindrical pillars in a row rest on an open front-facing arch. The base is two flat circles with edges flaring outward