Object Listing

Rectangular crossbar, curved and decorated near the narrow ends with a short row of zigzags carved in relief. Lugs flat rectangles, facing sides. Column single rectangular pillar narrowing slightly in centre. Base rectangular pinched at centre

Rectangular crossbar, slightly curved and sloping to one side. Decorated on upper side with a line incised from front to back. Lugs are flat rectangles facing sides, one is split along what appears to be the grain of the wood. Column is single flat, front-facing rectangle. Base is rectangular, flat underneath and rounded on top, with a short rectangular pillar at each side; the right one has pink, green and orange beads embedded in an oval on its lower side.

Rectangular crossbar, curved and decorated near the narrow ends with short rows of parallel incised lines. Lugs are flat semi-circles facing front. Column is a short rectangular pillar resting on a pair of parallel arches facing front and back.. Whole column is blackened. Base is two linked slightly convex circles.

Upper transverse plane curved up at either end. Two semi-circular lugs(one broken) projecting downwards from underside of upper transverse section. Vertical support consisting of two symmetrical cylindrical struts that link the upper transverse platform with a lower half-circle bar. The bottom ends rest on a bilobal base with central projecting section between the two lobes front and back.

Three solid fluted legs - one at either end and one in centre- Tail-like forms at either end

Rectangular crossbar, curved and decorated near the flattened narrow ends with a row of incised cross-hatchings which has worn away a little on one side. Lugs broken. Three circular pillars sloping inward slightly at the base and resting on an open front-facing arch. Base two flat roughly circular pieces joined by two small flat triangles at front and back

Rectangular crossbar, curved and decorated near the flattened narrow ends with a series of incised parallel lines. Lugs flat rectangles facing sides decorated with an incised triangle filled with incised lines. Column three circular pillars resting on an open, front-facing arch. Base of two flat linked circles with tiny triangles at centre front and back. Flares outward at edges.

Crossbar rectangular curved and decorated on the flattened, narrow ends with two row of incised cross-hatching. On either side of the middle are three incised circles with a hole in the centre. One corner is chipped off, but the scar is well paginated. Lugs are large open arches facing front, and blackened. Three circular pillars resting on an open, front-facing arch. Base is two flat circles linked at centre by a short flat bar.

Upper transverse plane curved up at either end. Two semi-circular lugs project downwards from lower side of upper transverse section. Vertical support consisting of four symmetrical cylindrical struts that link the upper transverse platform with a lower half-circle bar. The bottom ends rest on a bilobal base with narrower central section with projecting V-shapes between the two lobes front and back.

Upper transverse plane curved up at either end. Two lugs project downwards from underneath of upper transverse section. Vertical support consisting of two straight inner symmetrical cylindrical struts and two outer curved struts that link the upper transverse platform with a lower half-circle bar. The bottom ends rest on a bilobal base .

Upper transverse plane curved up at either end. Two lugs project downwards from underneath of upper transverse section. Vertical support consisting of a flat doughnut-like circle that joins the upper transverse platform with the bilobal base with projecting V-shapes between the two lobes front and back.

Upper transverse plane curved up at either end. Two circular lugs project downwards from underneath of upper transverse section. Vertical support consisting of a two inverted semicircles joined by a short cylindrical strut. The lower ends of the bottom semi-circle rest on the bilobal base with projecting M-shapes between the two lobes front and back.

Rectangular, curved crossbar decorated near the narrow ends with a row of zigzags carved in relief. It is cracked and has a corner missing but the scar is well patinated. Lugs are open arches facing front and blackened. The column is an open front-facing circle containing an x shape at the centre of which is another open circle. Base is two flat linked circles.

Upper transverse rectangular plane curved up at either end and decorated near narrow ends with a row of zigzags carved in relief. with lugs projecting from the under surface facing front. Vertical support consisting of two columns blackened front and back. These end in a flat bilobal base.

Upper transverse plane curved up at either end. Vertical support consisting of three struts. The lower ends of the struts rest on a bilobal base with indented V--shapes between the two lobes front and back.

Two solid, chunky, fluted legs at either end, each with narrower band of fluting projecting from top end edge. Truncated cone like projection from underside of horizontal transverse bar, Chip missing from lower end of one leg.

Upper transverse plane curved up at either end. Two circular lugs project downwards from underneath of upper transverse section. Vertical support consisting of a two bifurcated struts. The lower ends of the bottom semi-circle rest on the bilobal base with projecting M-shapes between the two lobes front and back.

Upper section rectangular, curved and decorated on the raised sections at the narrow ends with a row of diamonds carved in relief. No lugs. Column rough flat front-facing circle, flattened at top and bottom with three rectangular openings cut into the centre. It is decorated on all sides with two rows of incised diamonds following the edges of the pillars. Base rectangular, slightly convex and decorated with a double rows of incised triangles

Rectangular crossbar but flaring slightly at the ends. Curved and decorated near the narrow ends with a row of zigzag carved in relief. Lugs are flat semi circles facing front. Columns are two rectangular pillars, each having a blackened open arch on the outside, and being decorated with a blackened vertical row of rectangles carved in relief front and back. A piece of the base is missing but it was probably originally two flat linked spade shapes.

Rectangular crossbar with a pronounced curve and no decoration. No lugs. Two rectangular fluted pillars. Base is two flat circles joined by a short bar.

Crossbar rectangular, curved and undecorated. Lugs are two flat semi-ovoids facing front. Four rectangular pillars, two at front and two at back, sloping slightly inward towards base. Base is ovoid with flaring and fluted edges.

Upper transverse plane curved up at either end. Patterns carved into upper surface at each end. Two lugs project from underneath of upper transverse section. Vertical support consisting of a two differently patterned upright angular columns. The lower ends of these rest one bilobal base with projecting V-shapes between the two lobes front and back.

Rectangular crossbar, curved and decorated near the flattened narrow ends with a series of incised parallel lines. One broken lug. The other a semi-circle facing front with a small hole pierced through it. Two short rectangular pillars resting on a rectangular block. The pillars are carved front and back with a series of horizontal rounded pleats, and the block is decorated front and back with two rows of incised horizontal lines. Base is ovoid with a pronounced waist cut into centre front and back in which is a small semi-circle.

Rectangular crossbar curved and decorated near the narrow ends with a row of incised triangles. Lugs are flat rectangles facing sides. Two short rectangular pillars slope inwards from the top to form a V and rest on am oval disc with fluted edges which in turn rests on a rectangular block. Flat ovoid base with deep grooves cut at centre front and back. There is a small hole pierced through it on the right side.

Rectangular crossbar curved and decorated near the flattened narrow ends with a sloping row of incised triangles. Lugs are filled half-cylinders running front to back. Two circular pillars linked at centre by two short multi-faceted bars. And having on their outer sides an open front-facing arch. Base is ovoid with V-shaped dimples out of the sides and centre front and back.

Rectangular crossbar but flaring slightly at the narrow ends. Curved and decorated at the narrow ends with a row of incised triangles. Lugs are flat rectangles facing sides. Two short rectangular pillars slope inward from the top to just below centre to form a V which rests on a plain rectangular block. Base is two flat linked circles.

Two solid, chunky, fluted legs at either end, each with narrower band of fluting projecting from top end edge. Truncated semi-rectangular projection from underside of horizontal transverse bar. Two sets of three each concentric half circles carved into upper surface of leg sections.

Rectangular crossbar curved and decorated with a line of incised triangles near narrow ends. Lugs are open arches facing front. Single rectangular pillar titled to roughly 45 degrees from vertical to form a diagonal line between crossbar and base. Decorated with a panel of parallel pleats. Supported by two short, circular pillars, one from the base and the other from the crossbar. Base is two flat circles joined by a rectangular bar

Upper transverse plane curved up at either end. Two lugs project from underneath of upper transverse section. Vertical support consisting of three columns. The lower ends of these rest on a bilobal base.

Upper transverse plane curved up at either end. Strips of pattern carved into upper surface of ends. Two lugs project from underneath of upper transverse section. Vertical support consisting of two angular columns with vertical grooves. The lower ends of these rest on an S-shaped base.