Object Listing

Crossbar curved up towards narrow ends with a row of parallel grooves carved at either end. Lugs are flat rectangles facing inward. Two rectangular pillars on either side and one round central pillar rest on a rectangualr platform that has bulbous projections with hollow centres at either end. The mouths of these face outwards. Below the platform are two inward slanting rectangular pillars that rest on a raised ovoid base that taper towards the upper surface. This is decorated with bands of horizontal grooves.

It has a half circular metal handle attached to the top and bottom of the pillar.

Rectangular crossbar, curved, and undecorated. Rectangular flat inward facing lugs are 'hands' that become the arms of an anthropomorphised figure holding up the crossbar. The 'arms' make a 90° angle to joing two rectangular pillars or 'legs' on either side. Between the setwo pillars is a head with a face. From the top of its head a third cylindrical pillar projects to join the underside of the crossbar. Base of two flat linked circles with small pleats at centre front and back.

Rectangular crossbar, curved, and decorated near the arrow ends with a row of zig-zags. Lugs semi-circles facing front. Pillar is rectangle at top with hole through the middle. This rests on four upended arches, cylindrical in cross-section, one at front, one at back and two on either sid. These are supported by three rectangular pillars, the two outer pillars angled slightly inwards. Flat bilobal base.

Rectangular crossbar, curved and decorated near the flattenend narrow ends with a series of incised parallel lines. Lugs flat rectangles facing sides decorated with two incised triangles pointing inwards. Column three round pillars resting on an open, front-facing arch. Base of two flat linked circles with tiny triangles at centre front and back. Flares outward at edges.

Rectangular crossbar, curved and decorated near the flattenend narrow ends with a series of incised parallel lines. Lugs flat rectangles facing sides decorated with one triangle with incised lines. Lugs have small metal rings threaded through holes. Three rectangular pillars rest on an open, front-facing arch. Arch and pillars are engraved with incised lines. Base is a raised ovoid with vertical pleating.

Rectangular crossbar, curved and decorated near the flattenend narrow ends with a row of zig-zags. Lugs flat rectangles facing sides decorated with raised panels with grooved edges and small metal rings threaded through holes. An open front-facing arch with its curved end pointing downwards rests on two round pillars that rest on another open, front-facing arch facing feet down. Base is a flat and quatrifoil.

Crossbar and sides are composed of 3 flat concave rectangular planes in an inverted U shape. Theserest on an inverted open front-facing arch that rests on two round pillars that rest on another open, front-facing arch curved side up. These join a raise bilobal base. The U shape is decorated with zig-zag and triangular designs on one side plane and on its opposite plane with large triangles filled in with parallel grooves at an angle.

Crossbar curved up towards narrow ends small recangles filled with zig-zags on its upper surface. Lugs are solid semi-circles facing outwards. This rests on an inverted open front-facing arch that rests on two square blocks that rest on a flat retangular base that is rounded at the corners.

Crossbar curved up towards narrow ends with zig-zags carved into its flattened narrow ends. There are no lugs. The pillar consists of two cylindrical arches - the upper inverted and resting on the back of the lower - with a cylindrical ring looping around their join at the center . The two legs of the lower arch rests on a flat bilobal base with champhered edges flaring outwards. The arches and ring are decorated with grooved lines running along their length as well as rows of raised bumps.The champhered edge of teh base is decorated with carved quatrifoil forms made up of 4 inward pointing triangles. There is an old label stuck to the crossbar.

Upper transverse plane curved up at either end with square vertical lugs at either end that have triangular designs carved on them. Vertical support consisting of three round columns. These end in a raised bilobal shaped base

Crossbar rectangular and flat with slight curve upward towards it narrow ends. There are two rows of 6 each raised ridges on each side of the narrow left hand end of the crossbar and 4 and a bit rows on one side of the right-hand end running parallel to the narrow ends. It has a single pillar that narrows to the waist and then widens into two truncated 'legs' with a 'V-shape between them and to the front. There is a leather handle attached to the top and bottom of the central pillar.

Short crossbar curved up and downwards along its length. Lugs are truncated triangles facing outward. The flat vertical ends of the crossbar and the lug are decorated with rows of carved triangles. Two rectangular pillars rest on raised truncated cone shaped base The pillars are also decorated with rows of carved triangles.

Upper transverse plane curved up at either end with square vertical lugs at either end that have rows of small triangular designs carved on them. Vertical support consisting of four round columns. These rest on a raised ovoid shaped base with small projecting triangles at the centre.

Upper transverse plane curved up at either end. Lugs are flat diamond shapes facing inwards. Two rectangular pillars rest on an ovoid base with pleated edges.

Rectangular crossbar, curved and decorated at narrow ends with a row of zig-zags. Lugs are flat and rectangular with designs carved into their vertical surfaces (Is one missing?) . Two inward sloping rectangular pillars join together before resting on a circular platform with pleated edges. A truncated cone sloping outwards forms a central pillar and foot.

Rectangular crossbar, curved, and decorated on flattened narrow ends with a row of zig-zags. Lugs are truncated inverted triangles with a triangular design carved into their surface. Two inward sloping cylindrical pillars rest on a ovoid platform with pleated edges. Two outward sloping pillars descend from this resting on a flat bilobal base with projecting triangles centre front and back. The base is champhered flaring outwards.

Upper transverse plane curved up at either end.Three rectangular pillars rest on a central flat panel with pleated edges. This rests on two rectangulat pillars that rest on an ovoid base with pleated edges. Has an anthropomorphic feel.

Crossbar curved up towards narrow ends. Lugs are flat rectangular flaps facing inward with horizontal grooved decorations.Two inward facing open arched flank a central round pillar. All three rest on a raised ovoid base. ARches are decorated with parallel grooved lines on one side an zig-zags on the opposite side.

Rectangular crossbar, curved. No lugs . Two inward sloping rectangular pillars, that narrow towards their base, rest on a rectangular block with an upward curving upper surface. This block in turn rests on an ovoid base with champhered edges flaring outwards.

Crossbar curved up towards narrow ends with a line of diamond patterns at either end. Lugs are hollow arches facing outward. Two rectangular pillars in a V configuration rest on a flat truncated V shaped plane which rests on a raise bilobial base with a small projecting V between the two lobes. V shaped pillars are decorated with parallel grooves down their length.

Crossbar curved up towards narrow ends with a line of zig-zags carved at either end. Lugs are flat rectangular flaps facing inward. Two inward facing pilars are joined by a polygonal cylindrical bar. The pillars rest on a flat bilobal base with two projecting Vs between the lobes.

Stem with two circular bowls, one behind the other along the stem and flattened side to side. A small round foot under the end bowl. The insides of the bowls are lined with metal.

Bowl is embellished with geometric designs created from inlaid metal. There is a small round projection below the bowl and the shaft flares slightly at the mouthpiece end.

Bowl angle back 45 degrees towards mouthpiece end of shaft. A hollow circular shape is joined to the pipe bowl curving downwards from half-way up its length around its base and back to join the opposite side of the bowl. The shaft projects through this circle and ends with two projecting knobs either side of the bowl. These are attached to the circle by a short pillar. The bowl, circle and bulges are all decorated with geometric inlaid metal designs.

Elongated pipe bowl. A figure of a man is seated on the stem facing the bowl and holds onto a wedge shaped projection from the pipe bowl. The bowl and man are decorated with metal in geometric designs. The man has a round metal object projecting from the top of this head.

Pipe bowl projects out from the back of a quadruped, possibly a horse. The stem is positioned where the tail would join the body. There is an H shape in metal on the rump of the figure.

Pipe bowl projects out from the back of a quadruped, possibly a horse.The bowl is anthropomorphised with a face, ears, arms and legs and it sits on a small saddle. The stem projects from where the tail would join the body. The end of the shaft ihas a chip missing and the face of the animal is broken off.

Pipe is in the form of a U shape with curved outer edges. From the top of the side of the U opposite the bowl a section projects out horizontally and then takes a 90 degree angle. It is curved round on its inside edge. The surface bulges out in two sections - one the side of the bowl and the other on the opposite side of the U.